The Glow Experiments

As with all my experimenting in the different aspects of the technique, Mokume Gane holds for polymer clay, I was thinking about the layering of the B/W  sheets and the purpose for each in revealing the design placed in the polymer clay ... hence, the experiment with glow clay was born!

* I am using Sculpey Glow polymer clay.

 First, condition your clay, I ran it through the pasta machine (you can do it by hand) on the thickest setting, as you can see it is already glowing!!!

 



 

In the picture above, I applied the silver leaf and alcohol inks of choice (teak, butterscotch,golds and a 'Lil raspberry) then, allow to completely dry.  Once dry, I rolled out a thin sheet of translucent polymer clay and laid it on top of the sheet that was inked, then rolled out a sheet of black on the thickest setting and laid that on top of the stack then, ran the entire stack through the pasta machine on the thickest setting.  You may cut your stack in half if it is more manageable and make a double stack or just use your single stacks to cut-in your design.

** side note:  ( the sheet of white has been omitted so the glow clay shows up nicely as, you have the black outlining your design).







Here are the slices that were obtained from my single stacks.  top: lights on - bottom: lights off
 

~~ * ~~

Below are a few completed projects made from the slices obtained from the stack I had created 

 

 

 

~~ * ~~

 

~~ * ~~



The Tutorial - Introduction: Material's List Mokume Gane, Alcohol Inks and translucent Polymer Clay Technique

My Bracelet created from the Mokume Gane slices from this tutorial

Why am I doing this!?  Because there are a few people, and you know who you are that want to know how I am achieving these latest created pieces using translucent polymer clay and alcohol inks so, I am sharing my knowledge gained laboring diligently in my crafty LA-BOR-A-TORY! Just for fun, say that like Dr. Frankenstein after watching his monster high above the castle being electromagnetically shocked and then coming back down, down into the lab and twitching . . . and the doctor saying that famous line, It's Alive!!!!!

Okay, on with the tutorial!
** just a side note - if you have any questions and/or something you aren't understanding, do not hesitate to leave me a comment at the bottom *remember there are no stupid questions as there may be others sitting there at any point in time wondering the same thing but, afraid to ask!

In this tutorial I am assuming, you all have a basic knowledge and understanding of skills in beginning polymer clay.  With that said, Let's Begin!

What you will need:
Polymer clay:  I have used 3/4 of a 2oz bar of each
                         White
                          Black
                          Translucent
** this can be your choice depending on how much you want to create to be used for your future projects: necklaces, earrings, pendants, also used as an overlay on objects.  Also, use the clay you feel you get the best results from,  I use Sculpey Translucent.  I have used other brands; Kato, Fimo and Premo and I went back to Sculpey because I achieved the best transparency with it but, you use what you feel most comfortable.

Additional Materials and Tools used:

                           Pasta Machine (not a necessity)

                           Acrylic Roller ( or whatever you use for rolling)

                            Sharp Blade and/or Flexible Blade

                            Gold or Silver Leaf Sheets (1 sheet needed)

                            Cookie Cutters and/or objects to create a design

or effect in the clay (specifically for polymer clay)

                            Acohol Inks (any colors - Tim Holtz, Ranger, etc.)

** if you use regular cookie cutters or any objects to create your patterns in the clay DO NOT USE them  again for servicing or eating off of, in association with food or food preparation there afterwards.  They will remain dedicated polymer clay tools for use only!!!

                       

                                               On to Part 1 of The Tutorial